Release regularity and cleaning measures of magnetic anion exchange resin during application.

Anion exchange resin is responsible for removing harmful anionic contaminants in drinking water treatment, but it may become a significant source of precursors for disinfection byproducts (DBPs) by shedding material during application without proper pretreatment. Batch contact experiments were performed to investigate the dissolution of magnetic anion exchange resins and their contribution to organics and DBPs. Dissolved organic carbon (DOC) and dissolved organic nitrogen (DON) released from the resin were highly correlated with the dissolution conditions (contact time and pH), in which 0.7 mg/L DOC and 0.18 mg/L DON were distributed at exposure time of 2 h and pH 7. The formation potential of four DBPs in the shedding fraction was also revealed that trichloromethane (TCM), dichloroacetonitrile (DCAN), nitrosodimethylamine (NDMA), and dichloroacetamide (DCAcAm) concentrations could reach 21.4, 5.1, 12.1 µg/L, and 69.6 ng/L, respectively. Furthermore, the hydrophobic DOC that preferred to detach from the resin mainly originated from the residues of crosslinkers (divinylbenzene) and porogenic agents (straight-chain alkanes) detected by LC-OCD and GC-MS. Nevertheless, pre-cleaning inhibited the leaching of the resin, among which acid-base and ethanol treatments significantly lowered the concentration of leached organics, and formation potential of DBPs (TCM, DCAN, and DCAcAm) below 5 µg/L and NDMA dropped to 10 ng/L.

Electrodialysis desalination: The impact of solution flowrate (or Reynolds number) on fluid dynamics throughout membrane spacers.

The incorporation of a spacer among membranes has a major influence on fluid dynamics and performance metrics. Spacers create feed channels and operate as turbulence promoters to increase mixing and reduce concentration/temperature polarization effects. However, spacer geometry remains unoptimized, and studies continue to investigate a wide range of commercial and custom-made spacer designs. The in-depth discussion of the present systematic review seeks to discover the influence of Reynolds number or solution flowrate on flow hydrodynamics throughout a spacer-filled channel. A fast-flowing solution sweeping one membrane's surface first, then the neighboring membrane's surface produces good mixing action, which does not happen commonly at laminar solution flowrates. A sufficient flowrate can suppress the polarization layer, which may normally require the utilization of a simple feed channel rather than complex spacer configurations. When a recirculation eddy occurs, it disrupts the continuous flow and effectively curves the linear fluid courses. The higher the flowrate, the better the membrane performance, the higher the critical flux (or recovery rate), and the lower the inherent limitations of spacer design, spacer shadow effect, poor channel hydrodynamics, and high concentration polarization. In fact, critical flow achieves an acceptable balance between improving flow dynamics and reducing the related trade-offs, such as pressure losses and the occurrence of concentration polarization throughout the cell. If the necessary technical flowrate is not used, the real concentration potential for transport is relatively limited at low velocities than would be predicted based on bulk concentrations. Electrodialysis stack therefore may suffer from the dissociation of water molecules. Next studies should consider that applying a higher flowrate results in greater process efficiency, increased mass transfer potential at the membrane interface, and reduced stack thermal and electrical resistance, where pressure drop should always be indicated as a consequence of the spacer and circumstances used, rather than a problem.

Evaluation and sizing of proprietary sedimentation devices for decentralised stormwater treatment.

Suspended solids removal is a key performance measure for proprietary stormwater treatment devices. Various technologies are available, with manufacturers claiming hydrodynamic separators offer performance advantages. However, it is important to assess manufacturers' claims. Accordingly, this study seeks to compare the performance of proprietary devices, by applying dimensional analysis to third-party certification data and experimental data from uncertified devices, and to determine the accuracy of a single parameter estimation (Hazen or Péclet number) of removal efficiency. Statistical analysis indicates that device performance is well described by a single parameter estimation transitioning from Hazen (Nash-Sutcliffe coefficient = 0.81 and root mean square error = 5.1%) at low surface loading rates (SLR) in all technology types (high removal efficiency) to Péclet (Nash-Sutcliffe coefficient = 0.5 to 0.61 and root mean square error = 5.9% to 4.3%) at higher SLR (low removal efficiency) for hydrodynamic separators. This indicates that performance at low SLR is well explained by gravity separation in all technology types, whilst in hydrodynamic separators removal at high SLR is better explained by gravity separation plus advection. Consequently, when high (>80%) removal efficiency is required there is no performance advantage between technology types. However, when low (<50%) removal efficiency is required hydrodynamic separators offer a 33% increase in treatment area.

Moringa oleifera Plant as potent alternate to Chemical Coagulant in Water Purification

Abstract Quality of groundwater is threatened due to pollution by industrial, domestic and agricultural waste. A large number of populations are residing in rural areas which are unable to afford high cost water purifiers due to their low income as well as limited awareness. However, limited availability of fresh water has become a critical issue in developing countries. Around 1.2 billion population is deprived of affordable and safe water for their domestic need. Additionally, chemical coagulants which are nowadays being used for water purification pose severe and numerous health hazards to human. Thus utilization of easily accessible natural coagulant for water purification might offer a sustainable, practical and cost effective solution to the current alarming situation in developing countries. Several experimental findings have shown strong efficiency of Moringa oleifera plant extracts obtained from different solvents in the improvement of water quality parameters including physicochemical (such as pH, hardness, turbidity, metallic impurities, total dissolved solid) and biological (E.coli count) parameter. We have also highlighted the limitations and advantages of chemical coagulation in water purification. Altogether, this review summarizes one such miracle tree which has shown significant potential as a natural coagulant and its associated underlying mechanism in water purification process.

Application of HACCP for development of quality risk management in a water purification system

Abstract The present work reports the implementation of the Hazard Analysis Critical Control Point (HACCP) methodology to analyze the water purification system of a pharmaceutical site, in order to assure the system quality and prevent failures. As a matter of fact, the use of HACCP for development and implementation of Quality Risk Management (QRM) is not usual in pharmaceutical plants and it is applied here to improve the performance of the water purification system of a polymerization pilot plant used to manufacture pharmaceutical grade polymer microparticles. Critical Control Points (CCP) were determined with the aid of a decision tree and questions were made to characterize whether identified hazards constitute actual CCPs and should be monitored. When deviations were detected, corrective actions were performed and action plans were used for following-up and implementation of corrective actions. Finally, microbiological and physicochemical parameters were analyzed and the obtained results were regarded as appropriate. Therefore, it is shown that HACCP constitutes an effective tool for identification of hazards, establishment of corrective actions and monitoring of the critical control points that impact the process and the quality of the final pharmaceutical product most significantly.

Bacteriological quality of drinking water from source and point of use and associated factors among households in Eastern Ethiopia.

BACKGROUND: Biological deterioration of drinking water is the major cause of waterborne disease globally. However, there is a paucity of information on identifying the point where deterioration of the bacteriological quality of drinking water occurs (source or point of use) and associated factors among households in developing countries, especially in Ethiopia. METHOD: A community based cross-sectional study design was conducted among 425 households in Eastern Ethiopia. Households with at least one child under-five years of age were included in the study. A total of 448 Water samples (425 from households and 23 from water sources) were collected and analyzed by the membrane filtration method to identify Thermotolerant coliform. Binary logistic regression was performed to assess the association between each independent and dependent variable. Adjusted Odd Ratios along with 95% Confidence intervals were estimated to identify factors associated with the outcome variable. RESULT: This study revealed that 21.7%; 95% CI (4.5%, 39.1%) of water sources and 83.3%; 95% CI (79.8%, 87.1%) of households' drinking water were contaminated by thermotolerant coliform. Drinking water samples from households with poor wealth index [AOR = 9.63; 95%CI (2.92, 31.69)], households with unimproved sanitation facility [AOR = 2.81; 95%CI (1.31, 6.01)], households which shares their house with animal [AOR = 3.73; 95%CI (1.66, 8.37)], households that didn't practice household water treatment [AOR = 3.42; 95%CI (1.60, 7.31)] and not washing hands before water collection [AOR = 7.04; 95%CI (2.22, 22.30)] were significantly associated with deterioration of bacteriological quality of household drinking water. CONCLUSION: This study indicates that the bacteriological quality of drinking water deteriorates from source to point of use. Thus, health education programs on water, sanitation, hygienic practice must be enhanced to improve the quality of drinking water.

Factors affecting the performance of a solar still and productivity enhancement methods: A review.

Good-quality drinking water is an essential requirement for a healthy and sustainable future. In the current scenario, people living in remote areas of the world are deficient of potable water, especially in developing nations. Desalination technologies available today are energy intensive and aggravate carbon emissions as most energy requirements are fulfilled by using fossil fuels. Solar still is a simple and direct solar desalination device used for water distillation. The major problem associated with a solar still is its low productivity. The main aim of this review paper is to discuss various modifications in a solar still which resulted in productivity enhancement. Different parameters affecting a passive solar still performance and their optimum values for maximum productivity are also thoroughly analysed in this paper. Water depth is an important operating parameter that influences still productivity, and various results showed that maximum productivity is achieved mostly at minimum water depths.

Purple non-sulfur bacteria technology: a promising and potential approach for wastewater treatment and bioresources recovery.

Shortage of water, energy, and bioresources in the world has led to the exploration of new technologies that achieve resource recovery from wastewater, which has become a new sustainable trend. Photosynthetic non-sulfur bacteria (PNSB), the most ancient photo microorganism, not only treats different wastewater types, but also generates PNSB cells, which are non-toxic bioresources and containing many value-added products. These bioresources can be used as raw materials in the agricultural, food, and medical industries. Therefore, PNSB or PNSB-based wastewater resource recovery technology can be simultaneously used to treat wastewater and produce useful bioresources. Compared with traditional wastewater treatment, this technology can reduce CO2 emissions, promote the N recovery ratio and prevent residual sludge disposal or generation. After being developed for over half a century, PNSB wastewater resource recovery technology is currently extended towards industrial applications. Here, this technology is comprehensively introduced in terms of (1) PNSB characteristics and metabolism; (2) PNSB wastewater treatment and bioresource recovery efficiency; (3) the relative factors influencing the performance of this technology, including light, oxygen, strains, wastewater types, hydraulic retention time, on wastewater treatment, and resource production; (4) PNSB value-added bioresources and their generation from wastewater; (5) the scale-up history of PNSB technology; (6) Finally, the future perspectives and challenges of this technology were also analysed and summarised.

A universal route to fabricate bacterial cellulose-based composite membranes for simultaneous removal of multiple pollutants.

A self-standing, robust bacterial cellulose (BC)-based multifunctional composite membrane embedded with desirable nano-adsorbents has been successfully fabricated via a facile versatile strategy. As expected, the developed BC-based composite membrane enables the simultaneous and efficient removal of multiple co-existing pollutants.

A Novel N-Halamine Biocidal Nanofibrous Membrane for Chlorine Rechargeable Rapid Water Disinfection Applications.

Disinfecting pathogenic contaminated water rapidly and effectively on sites is one of the critical challenges at point-of-use (POU) situations. Currently available technologies are still suffering from irreversible depletion of disinfectants, generation of toxic by-products, and potential biofouling problems. Herein, we developed a chlorine rechargeable biocidal nanofibrous membrane, poly(acrylonitrile-co-5-methyl-5-(4'-vinylphenyl)imidazolidine-2,4-dione) (P(AN-VAPH)), via a combination of a free radical copolymerization reaction and electrospun technology. The copolymer exhibits good electrospinnability and desirable mechanical properties. Also, the 5-methyl-5-(4'-vinylphenyl)imidazolidine-2,4-dione (VAPH) moieties containing unique hydantoin structures are able to be chlorinated and converted to halamine structures, enabling the P(AN-VAPH) nanofibrous membrane with rapid and durable biocidal activity. The chlorinated P(AN-VAPH) nanofibrous membranes showed intriguing features of unique 3D morphological structures with large specific surface area, good mechanical performance, rechargeable chlorination capacity (>5000 ppm), long-term durability, and desirable biocidal activity against both bacteria and viruses (>99.9999% within 2 min of contact). With these attributes, the chlorinated P(AN-VAPH) membranes demonstrated promising disinfecting efficiency against concentrated bacteria-contaminated water during direct filtration applications with superior killing capacity and high flowing flux (5000 L m-2 h-1).

ACE2 Receptor-Modified Algae-Based Microrobot for Removal of SARS-CoV-2 in Wastewater.

The coronavirus SARS-CoV-2 can survive in wastewater for several days with a potential risk of waterborne human transmission, hence posing challenges in containing the virus and reducing its spread. Herein, we report on an active biohybrid microrobot system that offers highly efficient capture and removal of target virus from various aquatic media. The algae-based microrobot is fabricated by using click chemistry to functionalize microalgae with angiotensin-converting enzyme 2 (ACE2) receptor against the SARS-CoV-2 spike protein. The resulting ACE2-algae-robot displays fast (>100 µm/s) and long-lasting (>24 h) self-propulsion in diverse aquatic media including drinking water and river water, obviating the need for external fuels. Such movement of the ACE2-algae-robot offers effective "on-the-fly" removal of SARS-CoV-2 spike proteins and SARS-CoV-2 pseudovirus. Specifically, the active biohybrid microrobot results in 95% removal of viral spike protein and 89% removal of pseudovirus, significantly exceeding the control groups such as static ACE2-algae and bare algae. These results suggest considerable promise of biologically functionalized algae toward the removal of viruses and other environmental threats from wastewater.

The Use of Sodium Hypochlorite at Point-of-Use to Remove Microcystins from Water Containers.

Most conventional water treatment plants are not sufficiently equipped to treat both intracellular and extracellular Microcystins in drinking water. However, the effectiveness of sodium hypochlorite in removing Microcystin in containers at the point-of-use is not yet known. This study aimed to assess point-of-use water container treatment using bleach or sodium hypochlorite (NaOCl) and to assess the health problems associated with microcystins. Thirty-nine percent (29 of 74) of the total selected households were randomly selected to receive and treat their stored container water with sodium hypochlorite. The level of microcystin in the container water was measured after 30 min of contact with sodium hypochlorite. Microcystin concentrations in both the blooming and decaying seasons were higher (mean 1.10, 95% CI 0.46-1.67 µg/L and mean 1.14, 95% CI 0.65-1.63 µg/L, respectively) than the acceptable limit of 1 µg/L in households that did not treat their water with NaOCl, whilst in those that did, there was a significant reduction in the microcystin concentration (mean 0.07, 95% CI 0.00-0.16 µg/L and mean 0.18, 95% CI 0.00-0.45 µg/L). In conclusion, sodium hypochlorite treatment decreased microcystin s to an acceptable level and reduced the related health problems.

Immobilization of nitrifying bacteria on composite based on polymers and eggshells for nitrate production.

Nitrification is a key step in biological nitrogen transformation which depends on the performance of specialized microorganisms. Generally, nitrifying bacteria present a low growth rate and performance which can be improved when immobilized as a biofilm. The development of new materials suitable for the immobilization of nitrifying microorganisms is very important in nitrification and wastewater treatment. In this study, the effect of eggshell powder on biofilm formation by Nitrosomonas europaea an ammonium-oxidizing bacteria and Nitrobacter vulgaris a nitrite-oxidizing bacteria, on new polymeric supports were analyzed. Polylactic acid, polyvinyl chloride and polystyrene were tested to produce polymer-eggshells powder composites and used as biofilm supports for nitrifying bacteria. The support material was characterized to identify the most suitable polymer-eggshells powder combination for the cell adhesion and biofilm formation. The nitrification results showed a highest nitrate production of 42 mg NO3--N/L with polylactic acid-eggshell composite, with the best surface properties for cellular adhesion. Finally, scanning electron microscopy micrographs confirmed the best biofilm formed on polylactic acid-eggshell.

Engineering and characterization of gymnosperm sapwood toward enabling the design of water filtration devices.

Naturally-occurring membranes in the xylem tissue of gymnosperm sapwood enable its use as an abundantly-available material to construct filters, with potential to facilitate access to safe drinking water in resource-constrained settings. However, the material's behavior as a filter is poorly understood, and challenges such as short shelf life have not been addressed. Here, we characterize the operational attributes of xylem filters and show that the material exhibits a highly non-linear dependence of flow resistance on thickness upon drying, and a tendency for self-blocking. We develop guidelines for the design and fabrication of xylem filters, demonstrate gravity-operated filters with shelf life >2 years, and show that the filters can provide >3 log removal of E. coli, MS-2 phage, and rotavirus from synthetic test waters and coliform bacteria from contaminated spring, tap, and ground waters. Through interviews and workshops in India, we use a user-centric approach to design a prototype filtration device with daily- to weekly-replaceable xylem filters, and uncover indicators of social acceptance of xylem as a natural water filter. Our work enhances the understanding of xylem as a filtration material, and opens opportunities for engineering a diverse range of low-cost, biodegradable xylem-based filtration products on a global scale.

How Can the Desert Beetle and Biowaste Inspire Hybrid Separation Materials for Water Desalination?

Highly effective, hybrid separation materials for water purification were generated following a bioinspired system available in nature. The desert beetle was the inspiration for the generation of separation materials. Using the hydrophobic poly(vinylidene fluoride) (PVDF) membrane as the basis, the membrane was first activated and then furnished with silane-based linkers, and the covalent anchoring of chitosan was successfully accomplished. The obtained surface architecture was a copy of the desert beetle's armor possessing a hydrophobic matrix with hydrophilic domains. The modification was done in the presence or the lack of catalyst (N,N-diisopropylethylamine) that made it possible to tune easily wettability, roughness, and material as well as adhesive features. The membrane morphology and surface chemistry were studied by applying a series of analytical techniques. As a result of chitosan attachment, substantial improvement in transport and separation was reported. Pristine PVDF was characterized by a water flux of 5.28 kg m-2 h-1 and an activation energy of 48.16 kJ mol-1. The water flux and activation energy for a hybrid membrane with chitosan were equal to 15.55 kg m-2 h-1 and 33.98 kJ mol-1, respectively. The hybrid materials possessed enhanced stability and water resistance that were maintained after 10 cycles of membrane distillation tests.

A new continuous-flow solar water disinfection system inactivating cysts of Acanthamoeba castellanii, and bacteria.

Solar water disinfection (SODIS) is an effective and inexpensive microbiological water treatment technique, applicable to communities lacking access to safely managed drinking water services, however, the lower volume of treated water per day (< 2.5 L per batch) is a limitation for the conventional SODIS process. To overcome this limitation, a continuous-flow solar water disinfection system was developed and tested for inactivation of Acanthamoeba castellanii cysts and Escherichia coli, Salmonella Typhimurium, Enterococcus faecalis, and Pseudomonas aeruginosa. The system consisted of a solar heater composed of a cylindrical-parabolic concentrator and a UV irradiator formed by a fresnel-type flat concentrator combined with a cylindrical-parabolic concentrator. Deionized water with low or high turbidity (< 1 or 50 nephelometric turbidity unit (NTU) where previously contaminated by 108 Cysts/L or 105-106 CFU/mL of each of four bacterial species. Then was pumped from the heating tank flowing through the heater and through the UV irradiator, then returning to the heating tank, until reaching 45, 55, 60 or 70 °C. The water was kept at the desired temperature, flowing through the UV irradiator for 0.5 and 10 min. Trophozoites were not recovered from cysts (during 20 days of incubation) when water with < 1 NTU was exposed to UV and 60 °C for 0.5 min. In water with 50 NTU, the same result was obtained after 10 min. In water with < 1 NTU, the inactivation of all bacteria was achieved when the water with < 1 NTU was exposed to 55 °C and UV for 0.5 min; in water, with 50 NTU the same result was achieved by exposure to 60 °C and UV for 0.5 min. The prototype processes 1 L of water every 90s. The system is effective and has the potential to be applied as an alternative to the large-scale public drinking water supply.

Effect-based evaluation of ozone treatment for removal of micropollutants and their transformation products in waste water.

The aim of this interdisciplinary research project in North Rhine-Westphalia (NRW), Germany, entitled "Elimination of pharmaceuticals and organic micropollutants from waste water" involved the conception of cost-effective and innovative waste-water cleaning methods. In this project in vitro assays, in vivo assays and chemical analyses were performed on three municipal waste-water treatment plants (WWTP). This publication focuses on the study of the in vitro bioassays. Cytotoxic, estrogenic, genotoxic and mutagenic effects of the original as well as enriched water samples were monitored before and after wastewater treatment steps using MTT and PAN I, ER Calux and A-YES, micronucleus and Comet assays as well as AMES test. In most cases, the measured effects were reduced after ozonation, but in general, the biological response depended upon the water composition of the WWTP, in particular on the formed by-products and concentration of micropollutants. In order to be able to assess the genotoxic and/or mutagenic potential of waste-water samples using bioassays like Ames test, Comet assay or micronucleus test an enrichment of the water sample via solid-phase extraction is recommended. This is in agreement with previous studies such as the "ToxBox"-Project of the Environmental Agency in Germany.

TiO2@HNTs Robustly Decorated PVDF Membrane Prepared by a Bioinspired Accurate-Deposition Strategy for Complex Corrosive Wastewater Treatment.

As industrialization has spread all around the world, the problems of water pollution such as offshore oil spill and industrial sewage discharge have spread with it. Although many new separation materials have been successfully developed to deal with this crisis, a large number of water treatment materials only focus on the treatment of classified single water pollutant under mild conditions. It is a great challenge to treat soluble contaminants such as water-soluble dyes and insoluble contaminants, for example, emulsified oils simultaneously in a strong corrosive environment. Herein, in this work, corrosive resistance and multifunctional surface on a commercial polyvinylidene difluoride (PVDF) membrane via a tunicate-inspired gallic acid-assisted accurate-deposition strategy is created. Owing to the titanium-carboxylic coordination bonding and accurate-deposition strategy, the as-prepared membrane exhibits extraordinary stability, facing various harsh environmental challenges and incredibly corrosive situations (e.g., 4 M NaOH, 4 M HCl, and saturated NaCl solution). The robust multifunctional surface also endows commercial PVDF membrane with the ability for in situ separation and adsorption of surfactant-stabilized oil-in-water (corrosive and dyed) emulsions with high adsorption efficiencies up to 99.9%, separation efficiencies above 99.6%, and permeation flux as high as 15,698 ± 211 L/(m2·h·bar). Furthermore, the resultant membrane can be regenerated facilely and rapidly by flushing a small amount of HCl (4 M) or NaOH (4 M), making the corrosive resistance membrane attain a long-term and high-efficiency application for complex dyed wastewater treatment. Therefore, the multifunctional membrane has a broad application prospect in the industrial field.